Welcome~panamericanelectronics.Com Enterprise website

HOME-NEWS-Industry News-

What Kind Of Industrial Lighting Sources Are Used In Different Locations?

Writer:Jane Time:2021-06-15 Browse:185

Industrial lighting is generally used in the majority of places, the early industrial lighting is mainly used in the factory environment, but later gradually developed to coal mines, railways, docks and other major fields, the second generation of industrial lighting also ushered in the peak in this period, is also the first generation to the second generation of industrial lighting transformation, During this period to "Shenzhen is still lighting" as the representative of the second generation of industrial lighting manufacturers quickly began to occupy the market, thus being widely known, so different places to choose what kind of industrial lighting source?

Industrial lighting sources should be electrodeless lamps (please refer to this entry for more information), tricolor fine diameter straight fluorescent lamps, metal halide lamps or high pressure sodium lamps. Light source point from the ground height in 4m and below the appropriate selection of electrodeless lamp and thin tube fluorescent lamp; High-height factories (above 6m) can use electrodeless lamp and metal halide lamp, no color requirements can be used high-pressure sodium lamp.

Electrodeless lamp:
1. The lamps should be switched on and off frequently and started instantly;
2. There are driving operations where glare should be avoided;
3. Places where the lights are used for a long time and electricity consumption is large, and energy saving, electricity saving and money saving are needed;
4. Places where colors need to be strictly identified (such as spectral analysis room, chemistry laboratory, etc.).

Incandescent lamp:

(1) places with strict requirements to prevent electromagnetic interference.

(2) Frequent switching on and off lights.
(3) The illumination requirement is not high and the lighting time is short.
(4) local lighting and temporary lighting places.

In the need to strictly identify the color of the place (such as spectral analysis room, chemical laboratory, etc.) should use high chromatic tricolor fluorescent lamp.

High-power rocket launcher energy-saving lamp:

1) The lamps should be switched on and off frequently and started instantly;

2) The height of the workshop should be less than 10 meters, preferably 4-8 meters;
3) Places with large electricity consumption and need to save energy, electricity and money;
4) The service life of lamps is long, generally 3-5 years;
5) Need more realistic places (such as precision machinery, spectral analysis room, chemistry laboratory, etc.).

Ceramic metal halide lamp:

1) The height of the workshop should be more than 10 meters;

2) Places with high lighting requirements;
3) Places with large electricity consumption and need to save energy, electricity and money;
4) Need more realistic places (such as precision machinery, spectral analysis room, chemistry laboratory, etc.).

The above introduction is the application of four different industrial lighting sources in the place. For those who do not know the lighting solution in the industrial lighting place, you can consult the official customer service of "Dongguan Pan American electronics". The lamps used in different places will be different, so do not choose randomly!

CONTACT US

Phone: +86 139 2922 4100

Emaill:sales@panamericanelectronics.com

Add: No. 175, Zhongtang Section, Beiwang Road, Zhongtang Town, Dongguan, Guangdong, China

Scan the Wechat code
Focus on us
Close
the qr code