The Reason Why The LED Explosion-Proof Light Is Not Bright

Writer：Jane Time：2021-06-25 Browse：175

LED explosion-proof light is not bright is often encountered in the process of production operations, in order to help the majority of users to solve this trouble, explosion-proof lamp manufacturers to tell you about the LED explosion-proof light is not bright light source direction reasons:

1. Chip: chip leads to the lamp is not bright mainly, chip antistatic ability is poor, chip epitaxy defect, chip chemical residue, chip damage, new junction = structure process chip and light source material is not compatible with some of the circumstances.

2. Bracket: the existing LED explosion-proof lighting sources on the market choose copper as the matrix material of the lead frame. Therefore, the causes of LED explosion-proof lights are usually too thin silver coating, silver coating vulcanization, silver coating oxidation plating quality is poor, organic pollution and other causes.

Characteristics of LED explosion-proof light:

1. The heat dissipation of LED explosion-proof lights is better as a whole, and the probability of failure is reduced.

2. LED explosion-proof lights have good heat dissipation performance and stable function. Rubber gasket is used to encapsulate the lamps. LED explosion-proof light can be lit directly without delay.

3. with a special cable sealing device to install the lamp outlet belt, but also directly with steel pipe wiring.