Welcome~panamericanelectronics.Com Enterprise website

HOME-NEWS-Industry News-

Explosion-Proof Flashlight Interlocking Device

Writer:Jane Time:2021-07-16 Browse:163

The lamp shade of explosion-proof flashlight should be automatically cut off and then turned on. Interlocking devices are more complex and difficult to implement, and most lights are only clearly marked with a warning sign for uncharged opening. Because the surface temperature of the bulb is still very high and the curtains are opened immediately after the power failure, the ignition of explosive gas mixtures (mainly refers to flameproof structures), incandescent lamps, high-pressure mercury lamps,

Replace the bulb (tube), explosion-proof flashlight should be properly protected and not damaged; Flameproof surface should be painted after cleaning phosphate cream or oil do not paint other paint; Flame without rust layer on the surface, if slight corrosion, cleaning should have no gap. Used for dustproof and waterproof sealing ring must be guaranteed in good condition, which is very important for increased safety lamps. If the sealing ring is badly damaged, use the same size, replace the seals with the same material and, if necessary, replace the entire lamp. Note that the repair chimney is intact if you have cracked it and needs to be replaced as soon as possible.


Tel: +86 0769 38930008

Phone:+86 13267401690


Add: Building 6, Zhongtang Tian'an Digital City, No. 88, Jinyuan Road, Zhongtang Town, Dongguan City, Guangdong Province,China

Scan the Wechat code
Focus on us
the qr code